Asus CX200 - Manual (Page 76)

2 ASUS CX200 Internet Camera
SNMP Settings
Host Name: Provide a Name to identify this device.
HTTP Port: Enter the HTTP port assigned for ASUS Mimic CX200. Default
is 80, or check Basic Settings → Networks → Port Number.
Location: Provide a location for SNMP manager to track device.
Manager: Enter a manager’s name for identification.
Using SNMP to update network ports
Check this box if you want MultiMonitor to automatically update the HTTP
port as set in;
a. Web Interface, Basic Settings → Network → Port Number → HTTP port
number or in
b. Utility, IP Configuration → Advanced → Management Protocol