Asus Rampage IV Extreme - Manual

ASUS Rampage IV Extreme Technical Updates
ASUS Rampage IV Extreme Technical Updates
This is an information update for the user guide that comes with your motherboard package.
IE6797
Subzero Sense connector (page 2-27)
The Subzero Sense connector allows you to connect the K probe cable (purchased
seperately) to measure the motherboard temperature via BIOS, OC Key or
TurboV EVO without purchasing expensive multimeters.
Subzero Sense detects the connector’s ambient temperature when it’s unplugged.
VGA Hotwire Connector (page 2-30)
The VGA Hotwire connector allows you to precisely adjust the VGA card voltage directly
from motherboard BIOS, OC Key or TurboV EVO, reducing the risk of damaging your
VGA cards. Connect a 2-pin cable (purchased seperately) to the VGA Hotwire Connector
and weld the other end of the cable to the VGA card for voltage adjustment.
• Setting a high VGA voltage may lead to permanent damage to the VGA card.
• The motherboard does not provide a voltage increment higher than 3.3V.
PLL Vmem Vcore
PLL Vmem Vcore
15060-00N40000