Asus P5W DH Deluxe - Manual (Page 189)

ASUS P5W DH Deluxe 5-
7. Key in the RAID volume capacity that you want then press when
the Capacity item is highlighted. The default value indicates the maximum
allowed capacity.
8. Press when the Create Volume item is highlighted. This warning
message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
9. Press to create the RAID volume and return to the main menu or to
go back to the Create Volume menu.
10. The main menu appears as follows after you have created the RAID 10 set.
The HDD connected to the EZ_RAID connector is identified as “External
Disk.”
Intel(R) Matrix Storage Manager Option ROM v5.1.2.1002 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
ID Name
Level Strip Size Status Bootable
0 Volume0 RAID10(RAID0+1) XXKB XXX.XX GB Normal Yes
Physical Disks:
Port Drive Model
Serial # Size Type/Status(Vol ID)
0 XXXXXXXXXXX XXXXXXXX XX.XXGB Member Disk (0)
1 External Disk 0 XXXXXXXX XX.XXGB Member Disk (0)
2 XXXXXXXXXXX XXXXXXXX XX.XXGB Member Disk (0)
3 XXXXXXXXXXX XXXXXXXX XX.XXGB Member Disk (0)
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
[ MAIN MENU ]
When you create a RAID 10 set through a cross configuration, you cannot use
the EZ-Backup Manager utility to view the status of hard disks installed on the
EZ_RAID1 and EZ_RAID2 connectors. Intel ® Matrix Storage cannot read the
hard disk drive information on the ASUS EZ-Backup connectors.