Asus P8Z77-V LK - Manual (Page 82)

3-20 Chapter 3: BIOS setup
Chapter 3
3.5.4 System Agent Configuration
Main Ai Tweaker Advanced Monitor Boot Tool
Enable or disable memory remap above
4G.
Back Advanced\ System Agent Configuration >
EFI BIOS Utility - Advanced Mode
System Agent Bridge Name IvyBridge
Memory Remap Feature Enabled
> Graphics Configuration
> NB PCIe Configuration
Memory Remap Feature [Enabled]
[Enabled] Allow you to enable remapping the memory above 4GB.
[Disabled] Disables this function.
Graphics Configuration
Primary Display [Auto]
Allows you to select a primary display from IGFX, PEG, or PCI graphic devices, or
select SG for switchable GFX. Configuration options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [64M]
Allows you to set the iGPU memory size. Configuration options: [32M] [64M] [96M]
[128M] ~ [448M] [480M] [512M]
Render Standby [Enabled]
Allows you to enable or disable Render Standby by internal graphics devices.
Configuration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable/disable the Internal Graphics Device Multi-Monitor Support
for add-on VGA devices. Set this item to [Enabled] to empower both integrated and
discrete graphics. iGPU shared system memory size is fixed in 64MB. Configuration
options: [Disabled] [Enabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIE x16_1 [Auto]
Allows you to set the PCIE x16_1 link speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
PCIE x16_2 [Auto]
Allows you to set the PCIE x16_2 link speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]