Asus M2N68-VM - Manual (Page 10)

x
M2N68-VM specifications summary
(continued on the next page)
CPU Support AMD socket AM2 for AMD Athlon™ 64 FX /
Athlon™ 64 X2 / Athlon™ 64 / Phenom / Phenom FX /
Sempron / AM2+ processors
AMD64 architecture enables simultaneous 32-bit and
64-bit computing
Supports AMD Cool ‘n’ Quiet™ Technology
Chipset Nvidia ® GeForce ® 7050PV / nForce 630a (MCP68PVNT)
System bus 2000/1600MT/s
Memory Dual-channel memory architecture 4 x 240-pin DIMM
sockets support up to 8 GB of unbufferred ECC and
non-ECC 1066 / 800 / 667 / 533 MHz DDR2 memory
modules
* Only AM2+ supports DDR2 1066.
* When installing total memory of 4GB capacity or more,
Windows 32-bit operation system may only recognize
less than 3GB. Hence, a total installed memory of less
than 3GB is recommended.
Expansion slots 1 x PCI Express ™ x16 slot
1 x PCI Express ™ x1 slot
2 x PCI slots
Graphics Integrated Nvidia ® GeForce ® 7 Series Shader model 3.0
DirectX9 graphics processor
Maximum shared memory of 256 MB
Dual VGA output: RGB + DVI / RGB + HDMI*
Supports DVI-D with max. resolution 1920 x 1440
(@75MHz)
Supports RGB with max. resolution 1920 x 1440
(@70MHz*32bpp/75MHz*16bpp)
Supports HDMITM Technology with HDCP compliant with
max. resolution 1920 x 1080*
Note*:
• Due to the chipset limitation, simultaneous output for
DVI and HDMI is not supported. See page 1-24 for
details.
• Due to the chipset limitation, only MPEG 2 & WMV
Offload can support HD format 1920 x 1080p
• The suggested system configuration when playing
HD DVD and Blu-ray disc: DDR2 800 1GB x 2 / Althon
64 x 2 4400+ / Graphic shared memory 256 MB /
Purevideo HD support.
Storage/RAID - 1 x Ultra DMA 133 / 100 interface
- 3 x Serial ATA 3 Gb/s hard disk drives supporting
RAID 0, RAID 1, RAID 5, RAID 10, and JBOD
configuration
- 1 x External Serial ATA 3.0 Gb/s (SATA On-the-Go)
- ATAPI support, AHCI mode
LAN PHY Gigabit LAN