Asus NFC EXPRESS - Manual (Page 2)

Product Overview
Power LED
NFC sensing
area
USB 3.0 ports USB 3.0 port for PC connection
Parts and description
• Power LED
This LED indicator lights up when the NFC Express is currently in use.
• NFC sensing area
To use the NFC, put the NFC tag or another NFC-enabled device on this
area to enable the connection.
• USB 3.0 port for PC connection
Insert the bundled USB cable into this port to supply power to your ASUS
NFC Express box while connected to your desktop PC.
• USB 3.0 ports
These two USB (Universal Serial Bus) ports support USB 3.0 devices.
NOTES:
- DO NOT connect a keyboard/mouse to any USB 3.0 port when
installing the Windows ® operating system.
- Use USB 3.0 devices under Windows ® 8 and ensure that you have
installed the USb 3.0 driver.
- USB 3.0 devices can only be used for data storage.
- We strongly recommend that you connect USB 3.0 devices to USB
3.0 ports for faster and better performance of your USB 3.0 devices.
ASUS NFC tag
NFC sensing area
ASUS NFC Express box
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING! The use of shielded cables for connection of the monitor to the graphics card
is required to assure compliance with FCC regulations. Changes or modifications to this
unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
Labeling requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IC: Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210 of Industry
Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment
regulations.
This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. Cet appareil numérique
de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le fonctionnement est
soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d’interférences et
(2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement
non souhaité de l’appareil.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out
in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
Australia statement notice
From 1 January 2012 updated warranties apply to all ASUS products, consistent with the Australian Consumer
Law. For the latest product warranty details please visit http://support.asus.com. Our goods come with
guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at http://
support.asus.com
CE: European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July
1999 on the limitation of exposure of the general public to electromagnetic fields (0–300 GHz). This wireless
device complies with the R&TTE Directive.
NCC Warning
KCC Warning
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”), under
the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such
software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies
of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data, you
may obtain it for a period of three years after our last shipment of the product, either (1) for free by downloading
it from http://support.asus.com/download or (2) for the cost of reproduction and shipment, which is dependent on
the preferred carrier and the location where you want to have it shipped to, by sending a request to: ASUSTeK
Computer Inc. Legal Compliance Dept.15 Li Te Rd.,Beitou, Taipei 112, Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product
for which you wish to obtain the corresponding source code and your contact details so that we can coordinate
the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the
corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software
licenses. If however you encounter any problems in obtaining the full corresponding source code we would be
much obliged if you give us a notification to the email address [email protected], stating the product and describing
the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
EC
Declaration
of
Conformity
We,
the
undersigned,
M an uf ac tu re r:
AS US
Te K CO M PU TE R IN C.
Ad dr es s, C ity :
4F , N o. 1 50 , L I-T E Rd ., PE IT O U, T AI PE I 1 12 , T AI W AN
Co un try :
TA IW AN
A uthorize
d re pre se nta tiv e in Euro
pe :
AS US
C O M PU TE R G m bH
Ad dr es s, C ity :
HA RK
O RT S TR . 2 1- 23 , 4 08 80 R AT IN G EN
Co un try :
GERMANY
declare
the
follo
w ing
app
aratu
s:
Product
na me
:
NFC
se ns or box
w ith USB
3.0
hub
M od el n am e :
NF C- EX PR
ES
S
confo
rm
w ith
the
es sen
tial
requireme
nt s of th e fol lo w ing
dire
ct iv es:
2004/1
08/EC-EMC
Dir ecti
ve
E N 55 02 2: 20 10
E N 61 00 0- 3- 2: 20 06 +A 2: 20 09
E N 55 01 3: 20 01 +A 1: 20 03 +A 2: 20 06
E N 55 02 4: 20 10
E N 61 00 0- 3- 3: 20 08
E N 55 02 0: 20 07 +A 11 :2 01 1
1999/5/EC-R
&TTE
Dire
cti ve
E N 30 0 32 8 V1 .7 .1 (2 00 6- 10 )
E N 30 0 44 0- 1 V1 .6 .1 (2 01 0- 08 )
E N 30 0 44 0- 2 V1 .4 .1 (2 01 0- 08 )
E N 30 1 51 1 V9 .0 .2 (2 00 3- 03 )
E N 30 1 90 8- 1 V5 .2 .1 (2 01 1- 05 )
E N 30 1 90 8- 2 V5 .2 .1 (2 01 1- 07 )
E N 30 1 89 3 V1 .6 .1 (2 01 1- 11 )
E N 30 2 54 4- 2 V1 .1 .1 (2 00 9- 01 )
E N 30 2 62 3 V1 .1 .1 (2 00 9- 01 )
E N 50 36 0: 20 01
E N 62 47 9: 20 10
E N 50 38 5: 20 02
E N 62 31 1: 20 08
E N 30 1 48 9- 1 V1 .9 .2 (2 01 1- 09 )
E N 30 1 48 9- 3 V1 .4 .1 (2 00 2- 08 )
E N 30 1 48 9- 4 V1 .4 .1 (2 00 9- 05 )
E N 30 1 48 9- 7 V1 .3 .1 (2 00 5- 11 )
E N 30 1 48 9- 9 V1 .4 .1 (2 00 7- 11 )
E N 30 1 48 9- 17 V 2. 1. 1( 20 09 -0 5)
E N 30 1 48 9- 24 V 1. 5. 1( 20 10 -0 9)
E N 30 2 32 6- 2 V1 .2 .2 (2 00 7- 06 )
E N 30 2 32 6- 3 V1 .3 .1 (2 00 7- 09 )
E N 30 1 35 7- 2 V1 .4 .1 (2 00 8- 11 )
E N 30 2 29 1- 1 V1 .1 .1 (2 00 5- 07 )
E N 30 2 29 1- 2 V1 .1 .1 (2 00 5- 07 )
2006/9
5/EC-L
VD
Dir
ectiv
e
EN
6 09 50 -1 / A1 2: 20 11
E N 60 06 5: 20 02 / A1 2: 20 11
20 09 /1 25 /E C- Er P Di re ct iv e
R eg ul at io n (E C) N o. 1 27 5/ 20 08
R eg ul at io n (E C) N o. 6 42 /2 00 9
R eg ul at io n (E C) N o. 2 78 /2 00 9
201
1/6
5/EU-
RoHS
Direc
tiv e
V er . 1 30208
CE
marking
Declaration
Date:
17/05/2013
Year
to
begin
affixing
CE
marking:2013
Position
: C EO
Na
m e :
Je
rry
Sh
en
Signature
: __ __
__
__ __
(EC
conformity
markin
g)
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name:
As
us
C
om
pu
te r I
nt
er na
tio
na
l
Address:
800 Corporate Way, Fremont
, C
A
94
53
9.
Phone/Fax No:
(510)739-3777/(510)608-4555
he re by
d ec
la re s t ha
t t he
p ro du
ct
Product
Name
: NFC
sen
so
r bo
x w ith
USB
3.0
hub
M od
el N um
be
r :
NF
C-
EX
PR
ES
S
Conform
s to the following specifications:
FC
C Pa
rt 15 , S ub
pa rt B, U ni nt ent
iona
l R
adi
at or s
Supplementary Information:
Th
is
de vi ce c om
pl ies
w
ith
p ar t 1
5 of th
e FC
C Ru
les
. O
pe ra tio
n is su
bj ec t t o
th e
fo llo wi
ng t wo
c on
di tio ns : (1 )
Th
is
de vi ce m
ay n
ot c
au se h
ar m fu l
in ter
fe re nc e,
an d
(2 ) th is
de vi ce m
us t ac ce pt a ny
i nt er fe re nc e
re ce iv ed ,
in clu
di ng in
ter fe re nc e t ha
t m
ay ca
us e u
nd
es ire d op er ati on
.
Re
pr es en
ta tiv
e P
er so n’ s N
am
e :
Steve Chang / President
Si gna
tur
e :
D
at e :
May 10, 2013
Ver. 120601