Asus P8B75-V - Manual (Page 76)

3-18 Chapter 3: BIOS setup
Chapter 3
3.5.4 System Agent Configuration
Memory Remap Feature [Enabled]
[Enabled] Allow you to enable remapping the memory above 4GB.
[Disabled] Disables this function.
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by
the iGPU. Configuration options: [32M] [64M] [96M] [128M] ~ [448M] [480M] [512M]
[1024M]
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU
power use when idle. Configuration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Disabled]
Enables/disables Internal Graphics Device Multi-Monitor Support for add-on VGA
devices. Configuration options: [Disabled] [Enabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIE x16_1 speed. Configuration options: [Auto] [Gen1]
[Gen2]
Main Ai Tweaker Advanced Monitor Boot Tool
Enable or disable memory remap above
4G.
Back Advanced\ System Agent Configuration >
UEFI BIOS Utility - Advanced Mode
System Agent Bridge Name SandyBridge
Memory Remap Feature Enabled
> Graphics Configuration
> NB PCIe Configuration