beautypg.com

Iv. bios setup, Pnp and pci setup – Asus MEB User Manual

Page 52

background image

ASUS MEB User’s Manual

52

IV. BIOS SETUP

Plug & Play / PCI

IV

. BIOS SETUP

PNP and PCI Setup

The “PNP and PCI Setup” option configures the PCI bus slots. All PCI bus slots on
the system use INTA#, thus all installed PCI cards must be set to this value.

NOTE: SETUP Defaults are noted in parenthesis next to each function heading.

Details of PNP and PCI Setup

PNP OS Installed (No)
This field allows you to use a Plug-and-Play (PnP) operating system to configure
the PCI bus slots instead of using the BIOS. Thus interrupts may be reassigned by
the OS when Yes is selected. When a non-PnP OS is installed or to prevent reassign-
ing of interrupt settings, select the default setting of No.

Slot 1 IRQ / Slot 3 IRQ / Slot 4 IRQ (Auto)
These fields set how IRQ use is determined for each PCI slot. The default setting for
each field is Auto, which uses auto-routing to determine IRQ use. The other options are
manual settings of NA, 3, 4, 5, 7, 9, 10, 11, 12, 14 or 15 for each slot. If using manual
settings, each slot must have a unique IRQ number.

Slot 2/Audio IRQ (5)
This field sets the IRQ for PCI slot 2 which is shared with the onboard audio. The
default setting for this field is 5. The other options are manual settings of NA, 3, 4, 5, 7,
9, 10, 11, 12, 14
or 15 for this slot. If using manual settings, each slot must have a
unique IRQ number.

PCI Latency Timer (32 PCI Clock)
The default setting of 32 PCI Clock enables maximum PCI performance for this
motherboard.
......................................................................................................................................