2 memory configurations, Memory configurations -10 – Asus P8H61-M LX2 User Manual
Page 20
ASUS P8H61-M LX2 Series
1-10
1.4.2
Memory configurations
You may install 512MB, 1GB, 2GB, and 4GB unbuffered non-ECC DDR3 DIMMs into the
DIMM sockets.
• The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at a
higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency
adjustment.
• For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs) or overclocking condition.
• You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
• According to Intel CPU specification, DIMM voltage below 1.65V is recommended to
protect the CPU.
• Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
• Due to the memory address limitation on 32-bit Windows
®
OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows
®
OS.
- Install a 64-bit Windows
®
OS when you want to install 4GB or more on the
motherboard.
• This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less.
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing Voltage
DIMM socket support
(Optional)
1 DIMM
2 DIMMs
Crucial
CT12864BA1067.8FF
1GB
SS
Micron 9GF22D9KPT
7
-
•
•
Crucial
CT25664BA1067.16FF
2GB
DS
Micron 9HF22D9KPT
7
-
•
•
ELPIDA
EBJ10UE8EDF0-AE-F
1GB
SS
ELPIDA J1108EDSE-DJ-F
-
1.35V(low
voltage)
•
•
ELPIDA
EBJ11UD8BAFA-AE-E
1GB
DS
Elpida
J5308BASE-AC-E
-
-
•
•
ELPIDA
EBJ21UE8EDF0-AE-F
2GB
DS
ELPIDA J1108EDSE-DJ-F
-
1.35V(low
voltage)
•
•
KINGSTON KVR1066D3N7/1G
1GB
SS
KTC
D1288JPNDPLD9U 7
1.5V
•
•
KINGSTON KVR1066D3N7/2G
2GB
DS
ELPIDA J1108BDSE-DJ-F
7
1.5V
•
•
KINGSTON KVR1066D3N7/4G
4GB
DS
Hynix
H5TQ2G83AFR
7
1.5V
•
•
Micron
MT8JTF12864AZ-1G1F1 1GB
SS
Micron 9GF22D9KPT
7
-
•
•
Micron
MT16JTF25664AZ-1G1F1 2GB
DS
Micron 9HF22D9KPT
7
-
•
•
OCZ
OCZ3G1066LV4GK
4GB(2 x 2GB) DS
Micron 9BF27D9KPV
7-7-7-20 1.65V
•
•
Elixir
M2Y2G64CB8HC5N-BE
2GB
DS
Elixir
N2CB1G80CN-BE
-
-
•
•
Elixir
M2Y2G64CBHA9N-BE
2GB
DS
-
-
7-7-7-20 -
•
•
Elixir
M2Y2G64CBHC9N-BE
2GB
DS
Elixir
-
-
-
•
•
Kingtiger
2GB DIMM PC3-8500
2GB
DS
Hynix
H5TQ1G83AFP G7C -
-
•
•
P8H61-M LX2 Series Motherboard Qualified Vendors Lists (QVL)
DDR3-1066 MHz capability