beautypg.com

Asus ITX-220 User Manual

Page 19

background image

1-10

Chapter 1: Product introduction

2.

USB connector (10-1 pin USB56)
This connector is for a USB 2.0 port. Connect the USB module cable to this connector,

then install the module to a slot opening at the back of the system chassis. This USB

connector complys with USB 2.0 specification that supports up to 480 Mbps connection

speed.

Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard!

The USB module cable is purchased separately.

3.

Speaker connector (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker

allows you to hear system beeps and warnings.

E4590_ITX-220.indb 10

4/9/09 5:10:29 PM