Asus AT3GC-I - Manual (Page 38)

2-15 ASUS AT3GC-I
2.7 Tools menu
2.7.1 ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press , a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press to
confirm your choice.
2.7.2 AI NET 2
Check Realtek LAN cable [Disabled]
Enables or disables checking of the Realtek LAN cable during the Power-On Self-Test
(POST). Configuration options: [Disabled] [Enabled]
ASUS EZ Flash 2
AI NET2
Press ENTER to run the
utility to select and
update BIOS.
This utility supports :
1. FAT 12/16/32 (r/w)
2. NTFS (read only)
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
2.8 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values for the BIOS
items, and save or discard your changes to the BIOS items.
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Exit system setup
after saving the
changes.
F10 key can be
used for this
operation.
Pressing does not immediately exit this menu. Select one of the options from this
menu or from the legend bar to exit.
Tools Settings