Asus A7V333 - Manual (Page 91)

ASUS A7V333 motherboard user guide 75
4.5.1 Power Up Control
AC PWR Loss Restart [Disabled]
This allows you to set whether or not to reboot the system after power
interruptions. [Disabled] leaves your system off while [Enabled] reboots the
system. [Previous State] sets the system back to the state it was before the
power interruption. Configuration options: [Disabled] [Enabled] [Previous
State]
Wake/Power Up On Ext. Modem [Disabled]
The computer may be powered up the computer if the external modem
receives a call while the system is in Soft-off mode. Configuration options:
[Disabled] [Enabled]
Power Up On PCI Card [Disabled]
When set to [Enabled], the system through a network or a PCI modem. This
feature requires an ATX power supply that provides at least 1A on the +5VSB
lead. Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled]
This parameter allows you to use specific keys on the keyboard to turn on
the system. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead. Configuration options: [Disabled] [Space Bar] [Ctrl-
Esc] [Power Key]
NOTE! The computer cannot receive or transmit data until the computer
and applications are fully running. Thus, connection cannot be made on
the first try. Turning an external modem off and then back on while the
computer is off sends an initialization string that turns system power on.