beautypg.com

12 ai clock twister [auto, 13 ai transaction booster [auto, 14 cpu voltage [auto – Asus P5Q3 Deluxe/WiFi-AP @n User Manual

Page 90: 15 cpu gtl voltage reference(0/2) [auto

background image

3-20

Chapter 3: BIOS setup

3.4.12 Ai Clock Twister [Auto]

Allows you to set the DRAM performance. Set this item to [Light] or [Lighter]

to enhance DRAM compatibility, or [Strong] or [Stronger] to enhance DRAM

performance.

Configuration options: [Auto] [Lighter] [Light] [Moderate] [Strong] [Stronger]

3.4.13 Ai Transaction Booster [Auto]

Allows you to set the system performance.

Configuration options: [Auto] [Manual]

The following two sub-items appear only when you set the Ai Transaction

Booster item to [Manual].

Common Performance Level [05]

Set this item to a higher level for better compatibility or a lower level for better

performance. Use the <+> and <-> keys or the numeric keypad to enter the

desired value. The values range from 1 to 31.
Pull-In of CHA/B PH1/2 [Disabled]

Set this item to [Enabled] to apply enhancement on DRAM Channel A and B,

Phase 1 to 2. The number of phases is determined by DRAM frequency and

FSB strap.

Configuration options: [Disabled] [Enabled]

The following ten (10) items are adjusted by typing the desired values using

the numeric keypad and press the key. You can also use the <+> and

<-> keys to adjust the value. To restore the default setting, type [auto] using the

keyboard and press the key.

3.4.14 CPU Voltage [Auto]

Allows you to set the CPU VCore voltage. The values range from 0.85000V to

2.10000V* with a 0.00625V interval.

• Refer to the CPU documentation before setting the CPU Vcore voltage.

Setting a high VCore voltage may damage the CPU permanently, and

setting a low VCore voltage may make the system unstable.

• The value [2.10000V] of the CPU Voltage item is supported only if the

OV_CPU jumper is enabled. Otherwise the maximum voltage supported is

[1.70000V]. See 2. CPU / Northbridge overvoltage setting on page 2-21

for details.

3.4.15 CPU GTL Voltage Reference(0/2) [Auto]

Allows you to set the CPU GTL voltage reference. The values range from 0.370x

to 0.760x with a 0.005x interval. Different ratio might enhance CPU overclocking

ability.