Asus ASMB3 - Manual (Page 28)

2-14 Chapter 2: Installation
IPMI Specification Version
This item shows the auto-detected IPMI specification version.
BMC Firmware Version
This item shows the auto-detected BMC firmware version
System Event Logging [Enabled]
Allows you to enable or disable the IPMI event logging feature.
Configuration options: [Enabled] [Disabled]
Clear System Event Log [Disabled]
Enabling this item forces the BIOS to clear the system event log on the next
cold boot. Configuration options: [Disabled] [Enabled]
Existing Event Log number
This item shows the auto-detected quantity of existing/remaining event logs.
Event Log Control
The following sub-items allow you to control the event logs.
SYS Firmware Progress [Disabled]
Allows you to enable or disable the POST progress log feature.
Configuration options: [Disabled] [Enabled]
BIOS POST Errors [Enabled]
Allows you to enable or disable the POST error log feature.
Configuration options: [Disabled] [Enabled]
BIOS POST Watchdog [Disabled]
Allows you to enable or disable the BIOS POST watchdog feature.
Configuration options: [Disabled] [Enabled]
OS Boot Watchdog [Disabled]
Allows you to enable or disable the OS boot watchdog feature.
Configuration options: [Disabled] [Enabled]
Timer for loading OS (min) [10]
Allows you to set the timer value for the watchdog timer. Use the numeric keypad
to enter your desired value, or use the <+>/<-> key to increase/decrease the value.
Valid input values range from [1] ~ [100].
Time out action [No action]
Allows you to specify what action to take if the OS fails to boot.
Configuration options: [No Action] [Reset] [Power Off] [Power Cycle]
Date Format to show [MM DD YYYY]
Allows you to choose the date format to be displayed.
Configuration options: [MM DD YYYY] [DD MM YYYY] [YYYY DD MM]