Asus ASMB3 - Manual (Page 23)

ASUS ASMB3-SOL 2-
You must configure the network settings of both the remote server and the local/
central server to establish communication for remote server control and monitoring.
Prepare the support CD and a bootable floppy disk to configure the network
settings.
Running the BIOS IPMI configuration
To configure the IPMI in the BIOS:
1. Restart the remote server, then press during POST to enter the BIOS
setup.
2. Go to the Server menu, then select the IPMI Configuration sub-menu. Use
this sub-menu to configure the IPMI settings.
3. When finished, press to save your changes and exit the BIOS setup.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Server
Server Features
Remote Access Configuration
IPMI Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Server
IPMI Configuration
BMC Firmware version: 1.00-1.00
Boot Option Uses [System]
OS Boot Timeout [Disabled]
Timeout Value [ 0]
Clear System Even Log [Disabled]
BMC Time Sync. [Enabled]
System Event Log
LAN Setting
IPMI Configuration
System: Boot Option
is controlled by
BIOS.
BMC: Boot Option is
controlled by BMC.