Asus ASMB3 - Manual (Page 21)

ASUS ASMB3-SOL 2-7
MB: KFN4-DRE
a) FreeDOS command prompt
b) Broadcom ASF Firmware Update
c) Broadcom IPMI Firmware Update
d) ASMB3-SOL Firmware Update
Please choose a to d:
3. A screen appears, showing the current (if any) firmware version, and the new
firmware version. The screen also displays a confirmation message asking
whether or not you want to update the firmware appears. Press to
update.
Update Firmware Version : 1.01 (DSBF-D/SAS, DSBF-D, DSBV-D, DSCC-D12/SAS, DSCC-
D12, DSCC-DW
Update Firmware Version : 1.01 (KFN4-DRE)
Do you want to update firmware (y/n)?
Now, Starting to update firmware
Detect Flash Type - 2168
Programming Flash ...
Progress : 100
Initial BMC. Please wait..
Wait BMC ready.
Initial BMC O.K.
Update firmware Finish!
Detect MotherBoard -> (KFN4-DRE)
Detect KCS Interface
Size of SDR is 1728 bytes
enter update mode
Clear SDR ? (Y/N)
Clear SDR.
Loading SDR
SDR Loaded !
Exit update mode
Please turn off the stand by power !!
Press any key to continue . . ._
4. When the update is complete, turn off the system and unplug the AC power
cord for 5 seconds before restarting the system.
Current Firmware Version : 1.01 (DSBF-D/SAS, DSBF-D, DSBV-D, DSCC-D12/SAS, DSCC-
D12, DSCC-DW
Update Firmware Version : 1.01 (KFN4-DRE)
Do you want to update firmware (y/n)?
The firmware updating process starts.
2.3.2 ASMB3-SOL firmware update
1. Repeat the step1~4 in the previous sub-section.
2. Type (ASMB3-SOL Firmware Update).