Asus WL-HDD2.5 - Manual (Page 14)

14 ASUS Wireless "WL-HDD" Quick Start
System Setting
Click the System Setting option on the left panel to display its submenus.
This set of menus enables you to make changes to the system parameters
of the ASUS Wireless "WL-HDD". You can change the password, upgrade
the firmware from a file provided by ASUS, or restore the device to its
default factory settings using this set of menus.
Change Password
The Change Password menu allows you to change the
system password of the ASUS Wireless "WL-HDD".
(The default password is admin.) To change the
password, enter the new password in the New Password field and enter it
again for confirmation in the Retype New Password field. Click Save to
confirm your changes. You can enter
any password between 1-16
characters long (cannot be left blank).
If you forget the password at any
time, you can use the Factory Default
menu (see “Factory Default”) to restore the password to its default (admin)
value.
Note: The password is case sensitive.
Factory Default
Use this menu to restore the ASUS Wireless "WL-HDD"
to its default factory settings. Click the Restore button
to clear all settings and restore the factory defaults. The
device reboots after this function.
Note: You can also clear all settings and restore factory default
values by pressing and holding down the Reset button for 5 sec-
onds.