Asus P5G41T-M LX2/BR - Manual (Page 28)

ASUS P5G41T-M LX2/BR 1-19
This icon appears only when a removable storage device / USB drive is
connected. Left-click this icon to launch the File Manager window. Right-click it to
eject the removable storage device / USB drive.
Exits ASUS Express Gate. Click Yes to enter the operating system you installed
on the hard disk drive.
Powers off the computer.
• LAN settings
If you connect your computer to a home router that is connected to your DSL/cable
modem, enable all the LAN ports. Express Gate automatically uses the connected port.
If you plug the network cable into a different port while Express Gate is running (e.g. move
the cable from LAN1 to LAN2, restart Express Gate to activate the new setting.
• WiFi settings (if supported)
If you want to connect to a wireless network, click Setup to configure the WiFi options.
In the WiFi tab of the Advanced Network Settings box, key in the network name
of the wireless access point in the SSID field. If Security is enabled on the wireless
access point, select the corresponding security algorithm from the dropdown list such
as WEP or WAP in the Encryption Type field, and key in the password. Click OK to
enable WiFi and establish the wireless connection.
The number of the LAN ports vary
with the motherboard.
Accessing the Internet
To configure the network settings:
1. Click Configuration Panel on the
LaunchBar.
2. Click Network.
3. Make the proper network configurations.
Each network interface is enabled
immediately after you tick the Enable
checkbox.
If your computer does not automatically get network settings from a DHCP server, click
Setup to configure the static IP settings manually. If your computer automatically gets
network settings from a DHCP server, skip this step.