Asus P5PE-VM - Manual (Page 40)

1-28 Chapter 1: Product introduction
7. ATX power connectors (20-pin ATXPWR, 4-pin ATX12V)
These connectors are for an ATX power supply. The plugs from
the power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
• Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot up.
• Use a PSU with a minimum power rating of 300 W on this
motherboard. Use of a PSU with a higher power output
is recommended when configuring a system with more
power-consuming devices. The system may become unstable or may
not boot up if the power is inadequate.
R
P5PE-VM
P5PE-VM ATX Power Connector
ATXPWR ATX12V
+3.3Volts
-12.0Volts
Power Supply On
Ground
Ground
Ground
Ground
Ground
Ground
Ground
+5.0 Volts
+5.0 Volts
+5.0 Volts
+5.0 Volts
-5.0 Volts Power Good
+12.0Volts
+3.3 Volts
+3.3 Volts
+5V Standby
GND GND
+12VDC +12VDC