Asus M4A78-VM - Manual (Page 35)

• For detailed instructions on RAID configurations, refer to the RAID manual in the
support DVD.
• If you intend to create a Serial ATA RAID set using these connectors, set the OnChip
SATA Type select item in the BIOS to [RAID]. See page 2-9 for details.
3. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4, SATA5, SATA6)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk
and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA
1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the
standard parallel ATA with 133 MB/s (Ultra DMA133). If you install Serial ATA hard disk
drives, you can create a RAID 0, RAID 1, and RAID 0+1 configuration through the
onboard SB700 chipset.
Install the Windows ® XP Service Pack 1 before using Serial ATA.
Chapter 1: Product introduction 1-25