Configure dram timing by spd [enabled, Initiate graphic adapter [peg/pci, South bridge configuration – Asus P5KPL User Manual
Page 72: Hd audio controller [azalia
2-24
Chapter 2: BIOS setup
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
North Bridge chipset Configuration
Memory Remap Feature
[Enabled]
Configure DRAM Timing by SPD
[Enabled]
Initiate Graphic Adapter
[PEG/PCI]
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]
South Bridge Configuration
Options
South Bridge chipset Configuration
Audio Controller
[Azalia]
Front Panel Support Type
[HD Audio]
HD Audio Controller [Azalia]
Allows you to set the audio controller. Configuration options: [Azalia] [All Disabled]
Front Panel Support Type [HD Audio]
Allows you to select the front panel support type. If High Definition Audio
Front Panel used, please set HD Audio mode. Configuration options: [AC97]
[HD Audio]
Azalia
All Disabled