Asus P7H55D-M EVO - Manual (Page 78)

3-22 Chapter 3: BIOS setup
Chapter 3
Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor package.
Configuration options: [All] [1] [2]
A20M [Disabled]
[Enabled] Allows Legacy OSes to be compatible with APs.
[Disabled] Disables this function.
Intel(R) SpeedStep(TM) Tech [Enabled]
[Enabled] The CPU speed is controlled by the operating system.
[Disabled] The CPU runs at its default speed.
Intel(R) TurboMode Tech [Enabled]
[Enabled] Allows processor cores to run faster than marked frequency in specific
condition.
[Disabled] Disables this function.
Intel ® Turbo Mode function support depends on CPU types.
Intel(R) C-STATE Tech [Enabled]
The Intel ® C-State Technology allows the CPU to save more power under idle mode.
[Enabled] Enable this item only when you install a C-State Technology-supported CPU.
[Disabled] Disables this function.
C State package limit setting [Auto]
This item appears only when you set the Intel(R) C-STATE Tech item to [Enabled]. We
recommend that you set this item to [Auto] for BIOS to automatically detect the C-State mode
supported by your CPU. Configuration options: [Auto] [C1] [C3] [C6]
3.6.2 Uncore Configuration
The Uncore Configuration menu allows you to change the advanced chipset settings.
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Uncore Configuration
IMC Type : Clarkdale
Memory Remap Feature [Enabled]
PCI MMIO Allocation: 4GB To 3072MB
Initate Graphic Adapter [PEG/PCI]
iGPU Graphics Mode Select [Enabled, 32MB]
iGPU Frequency [Auto]
Current iGPU Frequency: 900 MHz
DVMT/FIXED Memory [256MB]
BIOS SETUP UTILITY
Advanced
Memory Remap Feature [Enabled]
[Disabled] Do not allow remapping of memory.
[Enabled] Allows for the segment of system memory that was previously overwritten
by PCI devices to be remapped above the total physical memory.