3 ai net 2, 4 asus ez flash 2, Ai net 2 -37 – Asus Sabertooth 55i User Manual
Page 99: Asus ez flash 2 -37, Chapter 3
ASUS SABERTOOTH 55i
3-37
Chapter 3
3.9.3
AI NET 2
Check Realtek LAN cable [Disabled]
[Disabled]
BIOS will not check the Realtek LAN cable during the Power-On Self-Test
(POST).
[Enabled]
BIOS checks the Realtek LAN cable during the Power-On Self-Test (POST).
3.9.4
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press
appears. Use the left/right arrow key to select between [Yes] or [No], then press
confirm your choice.
For more details, refer to section 3.2.2 ASUS EZ Flash 2 utility.
Update To Normal Mode [Press Enter]
Allows you to use the SATA_E1 (orange) and SATA_E2 (white) connectors as normal
SATA connectors.
When using only one hard disk in Normal Mode, connect the hard disk to the SATA_E1
(orange) connector on the motherboard.
Create Ultra Space [Press Enter]
This item appears only when you created a Super Speed or a EZ Backup set using
two hard drives with different capacity and allows you to create a single drive
partition using all the drive space unused by Drive Xpert.
Delete Ultra Space [Press Enter]
This item appears only when you have created a drive partition using the Ultra Space
function. All data stored in the Ultra Space partition will be erased.
Drive Xpert Device(s) List:
SATA_E1 (Orange) / SATA_E2 (White)
Press
SATA_E1 (orange) and SATA_E2 (white) connectors on the motherboard.
AI NET 2
Pair Status Length
Check Realtek LAN cable
[Disabled]
BIOS SETUP UTILITY
Tools