Asus GRYPHON ARMOR KIT - Manual (Page 3)

3
English
Assembling the Thermal Armor and the TUF Fortifier with your MB
To assemble your motherboard with the Thermal Armor and TUF Fortifier:
3. Position your motherboard upside down to an
orientation that aligns its THE ULTIMATE FORCE logo
with the printed THE ULTIMATE FORCE logo on the
Thermal Armor.
4. Carefully put your motherboard on the Thermal Armor
matching the screw holes of the Thermal Armor with the
screw holes of your motherboard.
Ensure that your motherboard fits neatly on the
Thermal Armor and no part is out-of-place.
5. Get the TUF Fortifier and position it upside down to an
orientation that aligns its THE ULTIMATE FORCE logo
with the printed THE ULTIMATE FORCE logo on your
motherboard.
6. Carefully put the TUF Fortifier on your motherboard and
Thermal Armor assembly. Ensure that the screw holes
of the TUF Fortifier matches the screw holes on your
motherboard and Thermal Armor assembly.
1. Take the Thermal Armor, the TUF Fortifier and all accessories out of the box.
2. Using the empty box as a base support, place the Thermal Armor upside down on the open box.
Ensure that the Thermal Armor is fitted neatly and firmly in the box.
7. Secure the TUF Fortifier, motherboard, and Thermal
Armor assembly with the bundled set of seven (7)
screws using the bundled Phillips screwdriver.
Refer to the illustration for the recommended sequence
of fastening the screws.
Fasten the screws to just about the proper tightness to
avoid damaging the TUF Fortifier, motherboard, or the
Thermal Armor.
A
F
E
D
B
C
G
Installing.the.back.I/O.assistant.fan
The 35mm back I/O assistant fan draws additional cold air into your Thermal Armor and expel more heat from your
motherboard to ensure that its temperature stays low and help improve your system’s stability.
To install the back I/O assistant fan:
1.
Locate and remove the screw on the Thermal Armor then
remove the back I/O fan cover lid.
Keep the screw for later use.
A
F
E
D
B
C
G
TUF Fortifier
Motherboard
Thermal Armor