Asus NCT-D User Manual

Page 90

4 - 2 0

C h a p t e r 4 : B I O S s e t u p

4.4.4

USB Configuration

The items in this menu allows you to change the USB-related features.
Select an item then press to display the configuration options.

USB Function [Enabled]

Allows you to enable or disable the USB function.
Configuration options: [Disabled] [Enabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for legacy USB devices. Setting to
[Auto] allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If no USB
device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controller [Enabled]

Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]

USB 2.0 Controller Mode [HiSpeed]

Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [HiSpeed ] [FullSpeed ]

The M o d u l e V e r s i o n

M o d u l e V e r s i o n

M o d u l e V e r s i o n and U S B D e v i c e s E n a b l e d

U S B D e v i c e s E n a b l e d

U S B D e v i c e s E n a b l e d items show the

auto-detected values. If no USB device is detected, the U S B D e v i c e s

U S B D e v i c e s

E n a b l e d

E n a b l e d item shows N o n e

N o n e

N o n e.

USB Configuration

Module Version - 2.23.2-9.4

USB Devices Enabled: None

USB Function

[Enabled]

Legacy USB Support

[Auto]

USB 2.0 Controller

[Enabled]

USB 2.0 Controller Mode

[HiSpeed]

Enables USB host
controllers.

This manual is related to the following products:

NCT-DA NCL-D