beautypg.com

3 fast boot [enabled, 4 post delay time [3 sec, 5 wait for ‘f1’ if error [enabled – Asus F2A55 User Manual

Page 72: Fast boot [enabled] -26, Post delay time [3 sec] -26, Wait for ‘f1’ if error [enabled] -26

background image

2-26

ASUS F2A55

Post Report [5 sec]

This item appears only when the Full Screen Logo item is set to [Disabled] and allows you to

set the waiting time for the system to display the post report. Configuration options: [1 sec] [2

sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10 sec] [Until Press ESC]

2.7.3

Fast Boot [Enabled]

Enable or disable boot with initialization of a minimal set of devices to launch active boot

option. Configuration options: [Disabled] [Enabled]

The following three items appear only when you set Fast Boot to [Enabled].

USB Support [Partial Initial]

[Disabled]

All USB devices will not be available until OS bootup for a fastest POST

time.

[Full Initial]

All USB devices will be available during POST. This process will extend the

POST time.

[Partial Initial]

For a faster POST time, only the USB ports with keyboard and mouse

connections will be detected.

PS/2 Keyboard and Mouse Support [Auto]

[Auto]

For a faster BIOS POST time, PS/2 devices will only be available when

the system boots up. PS/2 devices will not be available and BIOS Setup

program will not be accessible via PS/2 devices when the system is

restarted.

[Full Initial]

For full system control, PS/2 devices will be available during POST at any

circumstances. This process will extend the POST time.

[Disabled]

All PS/2 devices will not be available until OS bootup for a fastest POST

time.

Network Stack Driver Support [Disabled]

[Disabled]

The BIOS skips over the Network Stack Driver and tries to boot from the

next device.

[Enabled]

Allows the BIOS to boot from the Network Stack Driver.

2.7.4

Post Delay Time [3 sec]

Allows you to set the POST Report wait time. This configuration only functions in Normal

Boot mode. Configuration options: [0 sec] [1 sec] [2 sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec]

[8 sec] [9 sec] [10 sec]

2.7.5

Wait for ‘F1’ If Error [Enabled]

When this item is set to [Enabled], the system waits for the F1 key to be pressed when error

occurs. Configuration options: [Disabled] [Enabled]