beautypg.com

P5b-mx/wifi-ap atx power connector eatxpwr, Atx12v – Asus P5B-MX/WIFI-AP User Manual

Page 48

background image

1-36

Chapter 1: Product introduction

• For a fully configured system, we recommend that you use a power supply

unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)

and provides a minimum power of 400 W.

• Do not forget to connect the 4-pin ATX12V power plug; otherwise, the

system will not boot.

• Use of a PSU with a higher power output is recommended when

configuring a system with more power-consuming devices. The system

may become unstable or may not boot up if the power is inadequate.

• The ATX 12 V Specification 2.0-compliant (400W) PSU has been tested to

support the motherboard power requirements.

10. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs

are designed to fit these connectors in only one orientation. Find the proper

orientation and push down firmly until the connectors completely fit.

P

5

B

-M

X

/W

iF

i-

A

P

R

P5B-MX/WiFi-AP ATX Power Connector

EATXPWR

+3 Volts

+3 Volts

Ground

+5 Volts

+5 Volts

Ground

Ground

Power OK

+5V Standby

+12 Volts

-5 Volts

+5 Volts

+3 Volts

-12 Volts

Ground

Ground

Ground

PSON#

Ground

+5 Volts

+12 Volts

+3 Volts

+5 Volts

Ground

ATX12V

GND

+12V DC

GND

+12V DC