Asus Application Manual - Manual (Page 9)

EZ Backup
To start EZ Backup configuration:
1. Click EZ Backup from the main screen.
2. Check if the SATA cables
and power cords are installed
properly. Click Next to
continue.
3. Click Next to continue the
configuration.
4. Before proceeding, ensure that
you have back up all original
data in the hard disk connected
to the SATA_E2 (white, port 1)
connector on the motherboard.
Otherwise, the system erases
all data in the port 1 hard disk.
Click Next to continue.
5. The setup is completed. Click
OK to close the configuration
window.