Asus M2N68-AM PLUS - Manual (Page 14)

DDR2-800MHz capability
(continued on the next page)
Vendor Part No. Size
SS/
DS
CL Chip No.
Chip
Brand
DIMM support
A* B*
Kingston KHX6400D2LLK2/1GN 512MB SS N/A Heat-Sink Package Kingston • •
Kingston KVR800D2N5/1G 1G DS N/A E5108AJBG-8E-E Elpida • •
Samsung M378T2863QZS-CF7 1G SS 6 K4T1G084QQ-HCF7 Samsung • •
Samsung M391T2863QZ3-CF7 1G SS 6 K4T1G084QQ-HCF7(ECC) Samsung • •
Samsung M378T5263AZ3-CF7 4G DS N/A K4T2G084QA-HCF7 Samsung • •
Qimonda HYS64T64000EU-2.5-B2 512MB SS 6 HYB18T512800B2F25FSS28380 Qimonda • •
Corsair CM2X2048-6400C5DHX 2G(Kit of 2) DS 5 Heat-Sink Package Corsair • •
Crucial BL12864AA804.8FE5 2G(Kit of 2)(EPP) SS N/A Heat-Sink Package N/A • •
HY HYMP564U64CP8-S5 AB 512MB SS 5 HY5PS12821CFP-S5 Hynix • •
Kingmax KLDC28F-A8KI5 512MB SS N/A KKA8FF1XF-JFS-25A Kingmax • •
Apacer 78.91G91.9K5 512MB SS 5 AM4B5708JQJS8E0751C Apacer • •
Apacer 78.A1GA0.9K4 2G DS 5 AM4B5808CQJS8E0747D Apacer • •
VDATA M2GVD6G3H3160Q1E52 512MB SS N/A VD29608A8A-25EG20813 VDATA • •
ADATA M2OAD6G314170Q1E58 1G DS N/A AD29608A8A-25EG80810 ADATA • •
PSC AL7E8E63H-10E1K 2G DS 5 A3R1GE3CFF750RABBP(ECC) PSC • •
GEIL GX22GB6400LX 2G DS 5 Heat-Sink Package GEIL • •
G.SKILL F2-6400CL4D-2GBHK 1G DS 4 Heat-Sink Package G.SKILL • •
G.SKILL F2-6400CL4D-4GBPK 2G DS 4 Heat-Sink Package G.SKILL • •
OCZ OCZ2VU8004GK 1G DS 6 Heat-Sink Package OCZ • •
Century 28V0H8 1G DS 5 HY5PS12821CFP-S5 Hynix • •
DDR2-1066MHz capability
Vendor Part No. Size
SS/
DS
CL Chip No.
Chip
Brand
DIMM support
A* B*
Corsair CM2X1024-8500C5 1G DS N/A Heat-Sink Package N/A • •
OCZ OCZ2N1066SR2DK 2G(kit of 2) DS 5-5-5-15 Heat-Sink Package(EPP) SN:00482080600160-1 OCZ • •
GEIL GB24GB8500C5QC 1G SS 5 GL2L128M88BA25AB GEIL • •
SS - Single-sided / DS - Double - sided
DIMM support:
• A*: Supports one module inserted into either slot as the single-channel memory
configuration.
• B*: Supports one pair of modules inserted into both the yellow slots as one pair of
dual-channel memory configuration.
Visit the ASUS website at www.asus.com for the latest DDR2 667/800/1066MHz QVL.
• Due to AM2+ CPU limitation, only one DDR2 1066 is supported per channel.
• The default DIMM frequency depends on its Serial Presence Detect (SPD), which is the
standard way of accessing information from a memory module. Under the default state,
some memory modules for overclocking may operate at a lower frequency than the
vendor-marked value.
Chapter 1: Product introduction 1-5