beautypg.com

6 platform misc configuration, 7 onboard devices configuration – Asus B85-A User Manual

Page 59

background image

ASUS B85-A

2-31

USB_3, 4, 9~14 [Enabled]
Allows you to enable or disable an individual USB port. Refer to the section 1.2.3

Motherboard layout in this user manual for the locations of the USB ports.

Configuration options: [Enabled] [Disabled].

2.6.6

Platform Misc Configuration

The items in this menu allow you to configure the Platform Misc.

PCI Express Native Power Management [Disabled]

Allows you to enhance the power saving feature of PCI Express and perform ASPM

operations in the operating system. Configuration options: [Disabled] [Enabled]

Native ASPM [Disabled]

The item appears only when you set the previous item to [Enabled] and allows you to enable

or disable ASPM. Configuration options: [Enabled] [Disabled]

2.6.7

Onboard Devices Configuration

HD Audio Controller [Enabled]

[Enabled]

Enables the HD Audio Device.

[Disabled]

Disables the HD Audio Device.

The following item appears only when you set the HD Audio Controller item to [Enabled].

Front Panel Type [HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-

definition audio depending on the audio standard that the front panel audio module supports.
[HD]

Sets the front panel audio connector (AAFP) mode to high definition audio.

[AC97]

Sets the front panel audio connector (AAFP) mode to legacy AC’97

SPDIF Out Type [SPDIF]

[SPDIF]

Sets to an SPDIF audio output.

[HDMI]

Sets to an HDMI audio output.

Realtek LAN Controller [Enabled]

[Enabled]

Enables the Realtek LAN controller.

[Disabled]

Disables the controller.

Realtek PXE OPROM [Disabled]

This item appears only when you set the previous item to [Enabled] and allows you to enable

or disable the PXE OptionRom of the Realtek LAN controller.
Configuration options: [Enabled] [Disabled]

Serial Port Configuration

The sub-items in this menu allow you to set the serial port configuration.

Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).Configuration options: [Enabled]

[Disabled]