Asus P8H61-M2 USB3 - Manual (Page 45)

Chapter 2: BIOS information 2-13
2.4 Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Version 2.00.1201. Copyright (C) 2011 American Megatrends, Inc.
Forces a DDR3 frequency slower than
the common tCK detected via SPD.
According to Intel spec, ASUS H61 Series
motherboard supports 1066/1333MHz
DRAM (only).
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
EFI BIOS Utility - Advanced Mode
Target DRAM Speed : xxxxMHz
Displays the current DRAM speed.
2.4.1 Memory Frequency [Auto]
Allows you to set the memory operating frequency. Configuration options: [DDR3-800MHz]
[DDR3-1066MHz] [DDR3-1333MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.4.2 iGPU Max. Frequency [Auto]
Allows you to set the maximum frequency for the internal GPU. Use the <+> and <-> keys to
adjust the value. You can also key in the desired value using the numeric keypad. The values
range from 1100MHz to 3000MHz.
Target DRAM Speed : xxxxMHz
Memory Frequency Auto
iGPU Max. Frequency Auto
> GPU Boost
> DRAM Timing Control
> CPU Power Management
CPU Offset Mode Sign +
CPU Voltage 1.165V Auto
iGPU Offset Mode Sign +
iGPU Voltage Auto