North bridge configuration, 3 chipset, Primary graphics adapter [pci – Asus P5S-MX SE User Manual
Page 69: Internal vga [enable, Dram cas# latency [by spd, Support pcie muti adapter [disabled
ASUS P5S-MX SE
2-21
Primary Graphics Adapter
[PCI]
Internal VGA
[Enable]
DRAM CAS# Latency
[By SPD]
Share Memory Size
[128MB]
Support PCIE Muti Adapter [Disabled]
North Bridge Configuration
Primary Graphics Adapter [PCI]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [PCI] [PCI Express]
Internal VGA [Enable]
Allows you to enable or disable internal VGA.
Configuration options: [Disable] [Enable]
DRAM CAS# Latency [By SPD]
Controls the latency between the SDRAM read command and the time the data
actually becomes available. Configuration options: [By SPD] [3T] [4T] [5T]
Share Memory Size [32MB]
Sets the share memory size. Configuration options: [32MB] [64MB] [128MB]
[256MB] [Disabled]
Support PCIE Muti Adapter [Disabled]
Allows you to enable or disable PCIE multi adapter support function.
Configuration options: [Disabled] [Enabled]
2.4.3
Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press
North Bridge SIS671 Configuration
South Bridge SIS968 Configuration