beautypg.com

3 bootup numlock state [on, 4 wait for ‘f1’ if error [enabled, 5 option rom messages [force bios – Asus H61-PLUS User Manual

Page 74: 6 interrupt 19 capture [disabled, 7 setup mode [ez mode, 8 csm (compatibility support module), Bootup numlock state [on] -30, Wait for ‘f1’ if error [enabled] -30, Option rom messages [force bios] -30, Interrupt 19 capture [disabled] -30

background image

2-30

Chapter 2: Getting started

POST Delay Time [3 sec]

This item appears only when you set Full Screen Logo to [Enabled]. This item allows you to

select the desired additional POST waiting time to easily enter the BIOS setup. You can only

execute the POST delay time during Normal Boot. The values range from 0 to 10 seconds.

This feature will only work under normal boot.

Post Report [5 sec]

This item appears only when you set Full Screen Logo to [Disabled]. This item allows you to

select a desired post report waiting time. The values range from 1 to 10 seconds.

2.7.3

Bootup NumLock State [On]

[On]

Sets the power-on state of the NumLock to [On].

[Off]

Sets the power-on state of the NumLock to [Off].

2.7.4

Wait for ‘F1’ If Error [Enabled]

When this item is set to [Enabled], the system waits for the F1 key to be pressed when error

occurs. Configuration options: [Disabled] [Enabled]

2.7.5

Option ROM Messages [Force BIOS]

[Force BIOS]

The third-party ROM messages will be forced to display during the boot

sequence.

[Keep Current] The third-party ROM messages will be displayed only if the third-party

manufacturer had set the add-on device to do so.

2.7.6

Interrupt 19 Capture [Disabled]

[Enabled]

Allows the option ROMs to trap Interrupt 19.

[Disabled]

Disables this function.

2.7.7

Setup Mode [EZ Mode]

[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup

program.

[EZ Mode]

Sets EZ Mode as the default screen for entering the BIOS setup program.

2.7.8

CSM (Compatibility Support Module)

Allows you to configure the CSM (Compatibility Support Module) items to fully support the

various VGA, bootable devices and add-on devices for better compatibility.

Launch CSM [Enabled]

[Auto]

The system automatically detects the bootable devices and the add-on

devices.

[Enabled]

For better compatibility, enable the CSM to fully support the non-UEFI

driver add-on devices or the Windows

®

UEFI mode.

[Disabled]

Disable the CSM to fully support the Windows

®

Security Update and

Security Boot.