Asus T4-M3N8200 - Manual (Page 87)

5-36 Chapter 5: BIOS setup
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Tools
O.C. PROFILE Configuration
O.C. Profile 1 Status : Not Installed
O.C. Profile 2 Status : Not Installed
Save to Profile 1
Load from Profile 1
Save to Profile 2
Load from Profile 2
Start O.C. Profile
Save to Profile 1
5.7.4 ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
Save to Profle 1/2
Allows you to save the current BIOS file to the BIOS Flash. Press to save
the file.
Load from Profile 1/2
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press
to load the file.
Start O.C. Profile
Allows you to run the utility to save and load CMOS. Press to run the
utility.
ASUSTek O.C. Profile Utility V1.21
Current CMOS Restore CMOS
A:
Note
[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
PATH: A:\
BOARD: M3N18L
VER: 0112 [H:02 B:03]
DATE: 12/14/2007
BOARD: Unknown
VER: Unknown
DATE: Unknown
• This function can support devices such as USB flash disk or floppy disk
with FAT 32/16 format only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
the system boot failure!