Asus T4-M3N8200 - Manual (Page 78)

5-27 ASUS T-Series M3N8200
5.5 Power menu
The Power menu items allow you to change the settings for the ACPI and
Advanced Power Management (APM). Select an item then press to
display the configuration options.
5.5.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state
to be used for system suspend. Configuration options: [S1 (POS) Only] [S3 Only]
[Auto]
5.5.2 Repost Video on S3 Resume [No]
Allows you to determine whether to invoke VGA BIOS post on S3/STR resume.
Configuration options: [No] [Yes]
5.5.3 ACPI Version Feature [Disabled]
Allows you to enable or disable the ACPI version features.
Configuration options: [Disabled] [Enabled]
5.5.4 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When
set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
Suspend Mode [Auto]
Repost Video on S3 Resume [No]
ACPI Version Features [Disabled]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select the ACPI state
used for System
Suspend.
Do not change the ACPI APIC support after you have installed the operating
system (OS), otherwise, a boot failure may occur.