Asus RS161-E4/PA2 - Manual (Page 93)

ASUS RS161-E4/PA2 5-29
V00.00 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
APM Configuration
Restore On AC Power Loss [Power Off]
Resume by PS/2 Keyboard [Enabled]
Resume by PS/2 Mouse [Disabled]
Resume by Ring [Disabled]
Resume by PME# [Enabled]
Resume by RTC [Disabled]
→← Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
5.4.7 APM Configuration
This sub-menu allows you to change Advanced Power Management (APM)
features. Select an item then press to display the configuration
options.
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC
power loss. When set to Power On, the system will reboot after an AC
power loss. When set to Last State, the system goes into either off or
on state, whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Resume By PS/2 Keyboard [Enabled]
Allows you to use specific keys on the keyboard to turn on the system. This
feature requires an ATX power supply that provides at least 1A on the +5VSB
lead. Configuration options: [Disabled] [Enabled]
Resume By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to
turn on the system. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume By Ring [Disabled]
When set to [Enabled], the system will generate a wake event when the
external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Power-Off
Power-On
Last State
Options