Theatre Solution Planar Auditorium Seating - Manual (Page 5)

4 Planning, Installation & Specification Manual Planar Auditorium Seating
Planar Options
The Planar chair is available with many options. Choose the options that are appropriate for the project.
End Panels Stained to match the armrests, veneer end panels can enhance the visual appeal of the room. Due
to the simplicity of the Planar leg design, customized end panel profiles and options are easily accommodated.
Aisle Lights Low-voltage (24v) aisle lights discreetly illuminate dark aisles and steps, enhancing safety and
visual appeal. Aisle lights can be concealed in the underside of the arm cap, or installed in the end panel. Wiring
is routed through the frame to provide a clean installation.
Seat & Row Identification and Donor Tags Seat & row identification plates and donor tags are available in a
variety of shapes and finishes. Identification plates are recessed into the wood seat and armrest to achieve a
flush, clean appearance, and in order to resist tampering.
Tablet Arms The tablet arm folds between the seat and armrest and provides a work area for the occupant.
Tablet arms are available as either left or right-handed.
California Technical Bulletin 133 Fire Code Compliance (when required by local codes)
Removable Chairs Available as one, two, or three chairs, these units include a steel sled-base and can conform
to the row radii so as to provide harmony with the design of the room, while maintaining the utmost in flexibility.
Removable chairs are available with a standard base that allows them to be bolted to the floor quickly and easily,
or an extended base that allows them to be completely freestanding without the need for physical attachment to
the floor.
Solid Wood Edges Providing a higher level of warmth, solid wood edges hide the appearance of the plywood
layers that can be seen on the edges of the outer wood seat and back panels. (Not available on Traditional, R2,
and Taper shapes.)
Transfer Arms Designed to comply with the Americans with Disabilities Act, these unique frames allow easy and
clear access to the seat. Installations without an end panel feature a hinged lift-up armrest while installations with
end panels feature removable end panels.
Riser Mount Frames As an option to the traditional floor mounting of chair frames, riser mount frames are
available. This gives architects and designers another mounting option, which allows for easier cleaning of the
floors.
Oversize Chair Widths Chair widths of 23” and 24” c.c. are available to provide occupants with a higher level of
comfort and to satisfy layout requirements.
Bookracks Available to meet the specific requirements for book storage, TSI provides project specific solutions.