beautypg.com

Important safety instructions, Warranty, Package contents – Dayton Audio Sola Nero Bluetooth Speaker Black User Manual

Page 4: Specifications

background image

(4)

Sola-13

©Dayton Audio

®

Note about Bluetooth Technology

The wireless range of this Bluetooth device is approximately 20’ to 30’ depending on obstructions. Holding the Bluetooth source device

(iPhone, iPad, etc) in your hands or close to your body will drastically reduce the range of ALL Bluetooth devices. As a general rule the
user should select the music, adjust the volume, and then place the device on a table. Do not cup the device in your hands or place it
in your pocket, as this will cause the music to cut in and out.

The Bluetooth LED located on the rear indicates the status of the three Bluetooth modes. Ready to pair=quick flashes, Paired= 2 flashes,

Unpaired=1 flash Note: If the unit is not paired within 5 minutes it will automatically turn off the Bluetooth function and the LED will remain off.

Important Safety Instructions

To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified personnel.
To reduce the risk of fire and shock do not expose unit to rain or moisture. The unit should be connected to an earth grounded AC
electrical socket. The unit should be operated in a well ventilated area. Minimum clearance is 2 inches from the ventilation openings.

Warranty

The Dayton Audio Sola Bluetooth Audio System is warranted free from defects in

material and workmanship for one year from date of purchase. Warranty does not apply

to misuse, abuse, neglect, accident, improper use, etc. Note: If an inappropriate power

supply is used and the unit is damaged, the warranty will be void.

Package Contents:

• Sola Wireless Bluetooth Audio System
• World-compatible 18V@2A switch-mode power supply
• 3.5 mm audio input cable

Specifications:

Power Output:

15 watts RMS x 2 (30 watts total)

Total Harmonic Distortion: <0.1% @30W
Signal-to-Noise Ratio:

103 dB, A weighted

Crosstalk between inputs: 80 dB
Input Impedance: 33k

Ω ±5%

Input Sensitivity:

750 mV

Frequency Response:

70-18,000 Hz

Channel Separation:

95 dB

Efficiency: 85%
Dynamic Range:

>100 dB

Electrical Requirement:

18VDC @ 2A center pin positive

Dimensions:

3.750" H x 10.4375" W x 7.750" D

Weight:

6.2 lbs