2 v-1040bt cradle installation, V-1040bt cradle installation – SCANTECH ID (Champtek company) V-1040BT User Manual
Page 14

6
3.2
V-1040BT Cradle Installation
To set up your V-1040BT scanner with Bluetooth technology,
please follow the steps.
1.
Connect the supplied communication cable at the
bottom side of the cradle.
2.
Connect the other side of the communication cable
to the right connector of your POS or HOST system.
3.
Plug the external power supply into the power jack
on the bottom of the cradle.
4.
Plug the power supply into the AC outlet.
5.
Turn on your POS or HOST system.