SCANTECH ID (Champtek company) IG300BT - Manual (Page 36)

36
C. Indicator LED Status
a) Cradle
Light Signal Status
Green 1 blink
good read
and transmitted
Red
continuous on power on
off power off
Blue
2 blink BT disconnect
continuous on BT connected
b) Scanner
Light Signal Status
Green
1 blink and 1 beep
good read
and transmitted
good read
and save on
memory
(BT disconnect)
continue on battery charged full
Red
3 long blink and 3 long
beeps
memory full
3 long blink and 3 long
beeps
Into sleep mode
2 blink and 2 beeps low Battery warning
2 long blink and 2 long
beeps good read
but transmit fail
continue on in charging
Blue
3 short beeps BT disconnect
2 blink per 2 second on connecting
flash
BT disconnect
before sleep
1 blink per 2 second BT connected
Red
Blue
1 blink at the same time
and 2 beeps
setting ok
Red
Green
red and green light flash
alternately Battery over
charged