SCANTECH ID (Champtek company) NOVA N-4070 - Manual (Page 30)

Appendices 24
E CONTROLLING THE SCANNER FROM THE POS
This scanner can be controlled from the POS via the RS232C interface.
Control is achieved by transmitting the following single byte commands to
the scanner. In the default setting the following commands are available
(more details upon request):
ASCII Code Function Byte Also Called:
05 Hex power-up re-initialization ENQ or
OE Hex enable (cancel disable) Shift Out or
OF Hex disable Shift In or
12 Hex sleep DC2 or
14 Hex wake (cancel sleep) DC4 or
When the scanner is disabled (indicated by the blinking Blue LED), the
motor of the scanner will stay on until the scanner goes into sleep mode.
Scanner
control
POS
Powered with external power supply
Direct powering
Scanner
control