Universal Audio 1176LN Solid-State - Manual (Page 38)

Specifications
_____________________________________________________________
38
Input Impedance 600 Ω, bridged T-control (floating)
Output Load Impedance 600 Ω (floating)
Frequency Response 20 Hz to 20 kHz ± 1 dB
Gain 45 dB, ± 1 dB
Distortion > 0.5% T.H.D. from 50 Hz – 15 kHz
with limiting, at 1.1 seconds release setting.
Output of +22 dBm with no greater than 0.5% T.H.D.
Signal-to-Noise Ratio
> 81 dB with input signal at threshold of limiting,
over a bandwidth of 30 Hz to 18 kHz
Attack Time Adjustable, from 20 to 800 microseconds
Release Time Adjustable, from 50 milliseconds to 1.1 seconds
External Connections XLR / Original Jones barrier strip
Stereo Interconnection Optional, using 1176SA stereo interconnect accessory
Power Requirements 115V/230V
Power Connector Detachable IEC power cable.
Fuse 125 mA time delay (slow blow) / 115 V
63 mA time delay (slow blow) / 230 V
Dimensions 19" W x 3.5" H x 12.25" D (two rack unit)
Weight 11 lb. (with box, 14.5 lb.)