Billet Specialties Brake Pad 199450 User Manual
Page 2
Brake Pad Installation Instructions
#199450 / #199455
Applications
• ‘55-‘57 Chevy
• ‘58-‘64 Bel Air, Biscayne, Impala
• ‘63-‘ 67 Nova
Tools Needed:
• 3/32” drill bit
• 5/16” drill bit
• Spray Adhesive
• Center punch
• 7/16” wrench
1. Remove rubber pedal pad
2. Cut out template and apply spray adhesive
to the back, align template with pedal and
attach.
3. Center punch the pedal in the center of the
holes as marked on the template. Four options
are provided for
manufacturing variations; check pedal arm
location as to which holes to drill.
4. Drill 3/32” pilot holes in each center punch,
follow by drilling with 5/16“ drill bit.
5. Install 1/4”-20 socket set screw in appropriate holes in billet pedal cover, install
billet pedal cover on pedal then attach washer and lock nut. Tighten firmly by
alternating turns at each nut with 7/16” wrench.
Extra hardware is provided – just in case.
.993
3.307
1.606
1.737
Brake Pad Installation Instructions
#199450 / #199455
Applications
• ‘55-‘57 Chevy
• ‘58-‘64 Bel Air, Biscayne, Impala
• ‘63-‘ 67 Nova
Tools Needed:
• 3/32” drill bit
• 5/16” drill bit
• Spray Adhesive
• Center punch
• 7/16” wrench
1. Remove rubber pedal pad
2. Cut out template and apply spray adhesive
to the back, align template with pedal and
attach.
3. Center punch the pedal in the center of the
holes as marked on the template. Four options
are provided for
manufacturing variations; check pedal arm
location as to which holes to drill.
4. Drill 3/32” pilot holes in each center punch,
follow by drilling with 5/16“ drill bit.
5. Install 1/4”-20 socket set screw in appropriate holes in billet pedal cover, install
billet pedal cover on pedal then attach washer and lock nut. Tighten firmly by
alternating turns at each nut with 7/16” wrench.
Extra hardware is provided – just in case.
.993
3.307
1.606
1.737
Due to multiple sources used by the auto manufacturer,
some pedals may have to be trimmed for the pedal
cover to fit properly.
Due to multiple sources used by the auto manufacturer,
some pedals may have to be trimmed for the pedal
cover to fit properly.