beautypg.com

Figure 8 - install belt – Billet Specialties V-Trac Pulley System - Small Block Chevy User Manual

Page 11

background image

11

Figure 8 - Install Belt

Route belts as shown in appropriate diagram, adjust alternator belt tension
first. Tighten alternator mounting hardware firmly. Adjust compressor belt
tension, tighten rear compressor shoulder bolt firmly then front compressor
cap screw firmly. Finish by tightening the top compressor cap screw.

Re-check all fasteners for tightness and proper belt tension. Connect all
electrical and start motor and allow to warm up. Turn motor off and re-check
fasteners and belts. Re-check after 100 miles.

Alternator Belt Length:
• With Power Steering - 43.5” / Goodyear #15440
• Without Power Steering - 41.5” / Goodyear - #15420

Compressor Belt Length: 42.5” / Goodyear - #15430

With Power Steering

Without Power Steering