Billet Specialties Brake/Clutch Pedal 199360 User Manual
Billet Specialties For the car
1967 - 1969 Camaro / Firebird
Brake/Clutch Pedal
#199360 / #199365
Tools Needed:
• 3/32” drill bit
• 5/16” drill bit
• Spray Adhesive
• Center punch
• 7/16” wrench
1.40
1. Remove rubber pedal pad
2. Cut out template and apply spray adhesive to the back,
align template with pedal and attach.
3. Center punch the pedal in the center of the appropriate
holes as marked on the template. (Clutch and Brake
require different holes to be drilled).
4. Drill 3/32” pilot holes in each center punch, follow by
drilling with 5/16” drill bit.
5. Install 1/4”-20 socket set screw* in appropriate holes in
billet pedal cover, install billet pedal cover on pedal then
attach washer and lock nut. Tighten firmly by alternating
turns at each nut with 7/16” wrench.
* Extra hardware is provided
BRAKE
CLUTCH
OPTIONAL
CLUTCH/
BRAKE
CLUTCH/
BRAKE
1967 - 1969 Camaro / Firebird
Brake/Clutch Pedal
#199360 / #199365
Tools Needed:
• 3/32” drill bit
• 5/16” drill bit
• Spray Adhesive
• Center punch
• 7/16” wrench
1.40
1. Remove rubber pedal pad
2. Cut out template and apply spray adhesive to the back,
align template with pedal and attach.
3. Center punch the pedal in the center of the appropriate
holes as marked on the template. (Clutch and Brake
require different holes to be drilled).
4. Drill 3/32” pilot holes in each center punch, follow by
drilling with 5/16” drill bit.
5. Install 1/4”-20 socket set screw* in appropriate holes in
billet pedal cover, install billet pedal cover on pedal then
attach washer and lock nut. Tighten firmly by alternating
turns at each nut with 7/16” wrench.
* Extra hardware is provided
BRAKE
CLUTCH
OPTIONAL
CLUTCH/
BRAKE
CLUTCH/
BRAKE
Due to multiple sources used by the auto
manufacturer, some pedals may have to be
trimmed for the pedal cover to fit properly.
Due to multiple sources used by the auto
manufacturer, some pedals may have to be
trimmed for the pedal cover to fit properly.