Ocean Optics 74-ACH - Manual (Page 2)

74-ACH Installation and Operation Instructions
2 075-00000-000-01-201010
Application Tips
 The 74-ACH consists of an anodized aluminum base and adjustable mount bars.
 Each bar has four 3/8-24 threaded holes, spaced 2.54 cm (1") apart starting 2.54 cm (1") from
the top of the bar, to accommodate collimating lenses.
 The bars can be adjusted on the base by loosening two 10-32 threaded set screws with a
0.40 cm (5/32") hex-head wrench (not included).
 The bars can be set far enough apart to accept samples up to ~10 cm (3.94”) thick.
 The base is scored at ½ cm (0.20”) intervals as a path length guide.
Specifications
Assembly material:
Base
Mount bars
Blue anodized aluminum
Black anodized aluminum
Dimensions:
Base
Mount bars
Assembly
7.62 cm(3”) x 15.24 cm (6”) x 0.64 cm (¼”)
2.54 cm (1”) wide x 0.76 cm (0.3”) thick
15.24 cm (6”) height
Threads:
mount bars
set screws for mount bars
Accept 3/3-24 threads
10-32 threads
Measurement bar:
Has 0.5 cm (0.20”) gradations as path length measurement
guide. Total length is 10 cm (3.94”).