Ocean Optics Mini-D2-GS - Manual (Page 12)

2: Mini-D2-GS Specifications
Front Panel
SMA Connector
Shutter ON/OFF/TTL
Power LED
Halogen ON/OFF
Deuterium ON/OFF
SMA Connector
The SMA connector has a protection cap in place to prevent users from unintentionally looking directly
into the light source. To avoid this occurrence, connect the fiber optic cable to the SMA connector before
starting the Mini-D2-GS lamp. Use caution when handling other end of the fiber optic cable to ensure that
light radiation does not come into contact with skin and/or eyes.
WARNING
Protective eyewear must be worn when using this equipment - Intense
ultraviolet radiation present.
Never look directly into the light beam, as this can cause eye damage.
Rear Panel
Componenets on the rear panel of the Mini-D2-GS consist of
• Power Input Connector
• Lamp ON/OFF/TTL Switch
Power Input Connector
When a 12VDC connection is supplied to the Mini-D2-GS, the lamp automatically switches to the basic
operating mode. The LED indicator on the front panel will light to reflect this condition.
4 000-10000-110-02-0704