Ocean Optics HL-3 Series - Manual (Page 15)

000-10000-190-02-201308 7
Chapter 2
HL-3 Specifications
This section provides information on the operating environment and specifications of the HL-3 Series
light sources.
Operating Environment
The following table provides information on optimizing the operating environment of your HL-3.
Operating Environment The HL-3 Unit . . .
Moisture Is designed for operation in dry rooms only.
Ventilation Should be placed so that its location or position does not interfere with proper
ventilation.
Heat Should be placed away from any device that emits excessive heat.
Object and Liquid Entry Should be positioned so that objects do not fall on top of the unit. Additionally,
ensure that no liquids are spilled into the enclosure through openings.
Specifications
Specification Value
Spectral Range (calibrated):
Regular Models
EXT Models
350 – 1100 nm
350 – 2400 nm
Dimensions (LWH):
HL-3-CAL and HL-3-CAL-EXT
HL-3-INT-CAL and HL-3-INT-CAL-EXT
HL-3 plus-CAL and HL-3plus-CAL-EXT
HL-3 plus-INT-CAL and HL-3 plus-INT-CAL-EXT
13.5 cm x 5.8 cm x 5.9 cm; 5.3" x 2.3" x 2.3"
12.8 cm x 5.8 cm x 5.9 cm; 5.0" x 2.3" x 2.3"
14.5 cm x 6.3 cm x 6.1 cm; 5.7" x 2.5" x 2.4"
13.8 cm x 6.3 cm x 6.1 cm; 5.4" x 2.5" x 2.4"
Power Input 12 VDC/800 mA – 1100 mA (regulated)
Power Output 7 W
Bulb Life 10,000 hours (recalibrate after 50 hours of use)
Output to Bulb 5 V / 1.0 A