Ocean Optics CAL-2000 - Manual (Page 12)

1: Setup
2 000-10000-010-02-1209
Unpacking the CAL-2000
► Procedure
1. Unpack your lamp assembly carefully. Although the lamp is rigidly mounted, dropping this
instrument can cause permanent damage.
2. Inspect the outside of the instrument and make sure that there is no damage. Do not use the
instrument if damage is present.
3. Use this instrument in a clean laboratory environment.
Contents
Your CAL-2000 package should contain the following:

CAL-2000
Additionally, you will need a 12 volt DC power supply, such as the Mikropack PS220.