Ocean Optics USB-FHS Filter Holder - Manual (Page 2)

USB-FHS Installation Instructions
2 195-00000-000-01-201010
Parts Included
The Ocean Optics USB-FHS ships with the following items:
 USB-ISS-VIS light source attached to a metal plate
 Collimating lens
 10-pin connector extension
 Five screws
Attaching the Spectrometer to the USB-FHS
► Procedure
Follow the steps below to attach the USB Series Spectrometer to the USB-FHS Filter Holder:
1. Use two of the screws provided to attach the collimating lens to the spectrometer.
2. Attach the female end of the 10-pin connector extension to the USB-FHS Filter Holder and the
male end to the spectrometer.
3. Use two of the screws provided to attach the USB2000 to the USB-FHS metal plate.